Tech

Hello Everybody and ride revival! I am looking for some good advice on how to get a clean professional and practical install of putting some strip lights on my trailer. I have a 8.5x16' enclosed trailer that I am installing RGB strip lighting on the bottom side of the trailer. the lights I bought co

$900 https://www.ohm-racing.com/product/new-haltech-ic-7-display-dash-pre-order Haltech GPS Mod-$118 https://www.haltech.com/product/ht-011310-gps-speed-input-module/ Fuel Tank Sender Specs 4 ohm +/-1.0-Full 110 ohm +/-7.7-Empty https://tunertools.com/products/link-can-lambda-wideband A/C st

People around the various groups have been asking for paint codes for the Jeep Comanche MJ. As we are one of the premier MJ restorations companies on the west coast, i thought id take the time to document this and share with you all. I hope it helps with your future restorations efforts. 1986

https://diyoffroadproducts.com/product/84-01-xj-front-winch-kit/ This kit looks good, im trying to get the manufacturer to give me a relative weld and grind time.(how long it takes to get ready for paint/installation) Hopefully we can do something like this and keep it at about $500 installed. Not

I am wondering about getting new brakes for my 2015 Chrysler Town & Country. I have no idea how to replace them. I don't even know if I need to. I recently drove a rental of the same car and those brakes felt really new. I have had the 2015 for 3 years now and have not changed the brakes. How do I i

I was browsing the interwebs for all kinds of things for my 2000 XJ. I came across this link https://www.jeep.com/webselfservice/jeep/index.html?screenName=customer&country=us&emailUrl=goToEmailForm%2528%2527R%2527%2529 This link provide the Factory build sheet for your Jeep 1998 and newer! Pretty

I was Recently contacted and asked about battery and alternator wiring upgrades for the jeep cherokee. I have recently done it so I wanted to give a run down of how to do it and what you need. Its a real simple upgrade, and if you ever decide to go to a higher than stock amperage alternator, you wil

This has helped me tremendously in the search for leaf springs. If you want to make them flex, you need the info on lengths and weights. Here is a little. Feel free to add if you find something good out there. Years Description.................# Leaves........Width..Measures (A*B)...Spring Capa

Hello y’al, this is my first post. I’m about to start removing my dash and get my heater core out. I have watched Johns video and I’m still nervous. Any words of wisdom before I start and disconnect my batter? I don’t know why I’m nervous, I think I don’t want to eff anything up. The airbags scare

Lets talk CB radio tec' Im going to be ordering a new radio setup for MotherShip. i know id like to install a PA capable unit, aw well as something that has some sort of rf gain and external mic. BUT Handhelds units have been on my mind and work surprisingly well for the time i have gotten to use t

I have been asked this a Few times so i figured id give a run down of how to get a decent lift put together for the jeep Cherokee and what i would do if i had another stock platform to work with. First off, get a set of used Chevy S10 leaf springs. Use a band saw and cut the mounting bushings off

im in the market for some rock sliders and a rear bumper (that I eventually can put a swing away spare tire holder on). Any ideas?

Hello ride revival! I am looking for advice on wiring up a battery set up for my enclosed trailer here's some rough numbers I have put together. I have fluorescent lights T-12 86 watt for 4 bulbs. 5 hours run time for 3 days. frying pan- 1150 watts. 3 hours =3450 watts coffee pot- 900 watts.

I'm looking into getting a bumper that will eventually accept a winch and maybe a light bar. Do you have any suggestions?

I've got a 2000 XJ with a 3" lift (not sure the brand or who did the lift). Im trying to get some tires for trails/mud and snow. Any suggestions?